SCADA System Building

Double Wide 16' x 20' Interlocking Galvanized Sheet Metal Building
with Gable Roof, Single & Double Entry Doors, Interior Lighting & Split HVAC Unit

This 256 square foot SCADA system building was manufactured for a gas pipeline company to collect data and permit coordination of product transfers at a local control station. A double wide configuration (also sometimes known as a "split" or "clamshell" design) was used to reduce shipping costs, and a split HVAC unit was installed to heat and cool the SCADA system building. The evaporator unit was mounted in one section of this SCADA system building, and the condenser was shipped loose for field installation on the roof. This unique SCADA system building design required simplified electrical system connections and structural beams along the peak of the gable roof to permit separation. In the first phase of installation, the two sections of this SCADA system building were bolted together along the adjoining base and roof seams. Installers then attached exterior wall trim, a gable roof cap and urethane foam sealing blocks to the SCADA system building within a few hours.