 |
Recessed Wall Bulkheads
As a feature exclusive to Bebco Portable Modular Buildings, our Recessed Wall Bulkheads provide the most secure and aesthetic means available to route services through a wall. As shown in the image, they are mounted in the cavity of a wall space, leaving the exterior surface intact, so that only the cutouts for connections are required. Available in many sizes, in either solid or pre-punched configurations, this accessory maintains the best possible appearance and minimizes leakage. |
 |
Framed Wall Bulkheads
Bebco Framed Wall Bulkheads provide the most popular means to provide easy penetration points for your electrical, pneumatic and process connections, or equipment such as exhaust fans. Consisting of a perimeter frame and temporary or permanent cover plates, formed from painted carbon steel, stainless steel or aluminum, this accessory is utilized on almost every Bebco Portable Modular Building. Simply specify the size and location, and you'll save countless hours while providing strong pre-framed openings in your building walls! |
 |
Deck Bulkheads
Bebco Deck Bulkheads permit penetrations through our Shelter Bases. Frequently used as a method to connect high voltage cables to Switchgear, MCC and RIE Equipment, or to permit the penetration of equipment through the floor of a finished building, these bulkheads are offered with or without recessed cover plates. They also often feature heavy-duty structural framing to support the massive weight load of equipment which will be secured above them, as shown in this image. |
 |
Roof Bulkheads
Bebco Roof Bulkheads are most often used for the penetration of HVAC ductwork or for the ventilation of an area with exhaust fans. When equipment is to be added by others, these cutouts are fitted with a temporary cover as shown in this image. In many cases they are combined with critical structural framing to support roof mounted equipment. Bebco Roof Bulkheads may also be fitted with sealed curb flanges, built to meet specific height, flange and equipment bolting pattern requirements. |
|
)
)
)
)